Specification | | Model | AO700-12ALN | | Form factor: | EPS 12V 2.91 SLI Ready |
|---|
| Fan Type: | 120mm, 12VDC Fan |
|---|
| Power Factor Correction (PFC): | Active PFC |
|---|
| AC Input : | At 115V/ 60 Hz 17 ms minimum, At 230V/ 50 Hz 17 ms minimum |
|---|
| Dielectric withstand: | Input / output : 1800VAC for 1 second
Input to frame ground : 1800VAC for 1 second |
|---|
| Max. output Watts: | 700W |
|---|
| Humidity: | 5~95% RH,Non-condensing |
|---|
| Efficiency: | 80%
Typical : 83% (at full load) |
|---|
| Power good signal: | Turn-on delay from 100ms to 500ms |
|---|
| Overload current protection: | 150% Max |
|---|
| Over voltage protection: | Support +5V : 7.0V(max)
Support +3.3V : 4.8V(maximum)
Support +12V : 15.6V(maximum) |
|---|
| Transient response: | output voltage recovers in less than 1 ms max.following a 25% load change |
|---|
| Temperature Range: | -20℃~+80℃ (storage) |
|---|
| Safety: | VDE
3C
FCC
CE
UL
Nemko
CSA
CB
C-TICK |
|---|
| PIN: | 5L1S, 4SATA, 2PCIe, 1EPS12V |
|---|
| +3.3V: | 36A |
|---|
| +5V: | 30A |
|---|
| +12V (1): | 15A |
|---|
| +12V (2): | 15A |
|---|
| -12V: | 0.5A |
|---|
| +5Vsb: | 2.0A |
|---|
| Connector: | Easy Plug |
|---|
| Chassis: | Black coating |
|---|
| Cable: | Cable sleeving with Heat Tube |
|---|
| FAN: | Blue LED Ball Bearing |
|---|
| Warranty: | 3 Years |
|---|
|
